BHSXP - BIOMER BASE PASTE 917094

  • MSDS: BHSXP
  • Manufacturer: CAULK DENTSPLY
  • Product Name: BIOMER BASE PASTE 917094
  • National Stock Number: 6520-00F010636
Product Identification

Product ID:BIOMER BASE PASTE 917094
MSDS Date:01/15/1990
FSC:6520
NIIN:00F010636
MSDS Number: BHSXP

Responsible Party
CAULK/DENTSPLY
LAKEVIEW AND CLARKE AVE
MILFORD, DE 19963-0359
US

Emergency Phone: 302-422-4511

Info Phone: 302-422-4511

Preparer: EARL C. FRANCIS

Cage: 11107

Contractor
CAULK/DENTSPLY
359 MILFORD, DE 19963-0359 US

Telephone: 302-422-4511/ 703-451-1900

Cage: 11107

Ingredients

URETHANE DIMETHACRYLATE RESIN

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION & POSSIBLE CORNEAL
DAMAGE. SKIN: IRRITATION OR POSSIBLE ALLERGIC RESPONSE.
Explanation of Carcinogenicity:NONE
Medical Cond Aggravated by Exposure:OPEN SORES & WOUNDS OF THE SKIN.
INDIVIDUALS W/KNOWN SENSITIVITY TO ACRYLATES.

First Aid

First Aid:EYES/SKIN: FLUSH W/FLOWING WATER FOR 15 MINUTES. SKIN: FLOW
BY WASHING AREA W/MILD SOAP & WATER. OBTAIN MEDICAL ATTENTION IN
ALL CASES.

Fire Fighting

Extinguishing Media:CO2, DRY CHEMICAL, HALON
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:DURING A FIRE, IRRITATING GASES DUE TO
THE DECOMPOSITION MAY BE PRESENT.

Accidental Release

Spill Release Procedures:SPREAD VERMICULITE ON PASTE TO ABSORB ANY
RESIN, SCOOP UP & PLACE IN AN APPROPRIATE MARKED CONTAINER.

Handling

Handling and Storage Precautions:STORE AWAY FROM FOOD & BEVERAGE.
OBSERVE NORMAL WAREHOUSE HANDLING PROCEDURES.

Exposure Controls

Respiratory Protection:NONE REQUIRED
Ventilation:LOCAL EXHAUST: RECOMMENDED
Protective Gloves:RUBBER
Eye Protection:PROTECTIVE GOGGLES
Other Protective Equipment:RUBBER APRON
Work Hygienic Practices:OBSERVE NORMAL CARE WHEN WORKING W/CHEMICALS
Supplemental Safety and Health

Chemical Properties

Spec Gravity:1.9
Solubility in Water:NOT SOLUBLE
Appearance and Odor:BEIGE PASTE WITH SWEET ACRYLIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
PEROXIDES
Stability Condition to Avoid:HEAT >60C
Conditions to Avoid Polymerization:HEAT >70C

Disposal

Waste Disposal Methods:WASTE MATERIAL MAY BE DISPOSED UNDER CONDITIONS
ACCORDING TO FEDERAL, STATE & LOCAL ENVIRONMENTAL CONTROL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.